I need to copy the current configuration to a new pc. I really don't want to reconfigure everything cause the sign is in a bad place and hard to connect too. The current config is with Windows 10 home and the new is 11 home
A
Answer by
Ashish Bajaj
To move the configuration of LedCenterM to a new laptop, you can follow these steps:
Locate the configuration file on your current laptop. It is usually stored in a specific folder within the LedCenterM program files.
Copy this configuration file to a USB drive or cloud storage.
Install LedCenterM on your new laptop.
Paste the configuration file into the correct folder on your new laptop.
Open LedCenterM and check if the configuration has been successfully transferred.
This process should help you avoid the need to reconfigure everything from scratch.
To determine the c-power model of your display board, you can refer to the documentation or user manual provided by the LedCenterM program for Windows. It should contain information about identifying the specific model of the display board.
Is there anyway to lock certain programs down ie. I have 4 programs setup to display certain windows and I want to lock 3 of the programs down so they cannot be changed by others
A
Answer by
Akash Shah
Yes, it is possible to lock certain programs down using the "LedCenterM" program for Windows. Consult the program's documentation or support resources for instructions on how to achieve this.
I would like to change the IP address on my led text display, using LedCenter. I need the password when I go into TOOLS, LED TOOL, then select C-POWER 3200. To make changes and send the file to the led display, I also need the password.
J
Answer by
Julia Bocchetta
C-power products use 16888 as default administration password. Input this password then you will have access.
I'm getting a 10060 error from LedCenterM 5.0. What can I do?
P
Answer by
Pete Clapp
In order to fix the issue, I suggest you update the software to LedCenterM 5.1.2. It is the latest version of the program and it fixes many bugs and crashes. If the problem persists, uninstall the program and then install it again. Also, after the removing process is complete, run a registry cleaner like CCleaner or Glary Utilities.
hi, I have a problem with this device, ledcenterm recognizes the device, but when I want to program it gives me error "C-power (1): can't send the file! screen controlerflash is not enough for program data !. when I try again to do the programming gives me another error; "C-power (1): failed to communicate with controler". then I have to unplug the power plug and then reconnect it. the program knows the device but not correctly this is the error "read back c-power 1200,1.0.0 (w) .0 (h) with a written under red "invalid data will be reset, please change manually !. I change manually and put the dimensions of the panel" width 256 height 16 " but despite this it does not work. This problem was sporadic before, but it worked, now it has stopped completely and I can no longer do a programming. can you help me to solve this problem? could it be a BIOS problem? with c-power tool what can i do to make it work ?? do you have any files for to update the BIOS or the BOOT? what is the password to make these updates? please wait for a reply from you. best regards
Answer by
Swati Dubey
It seems like you are experiencing a technical issue with the LedCenterM program and the C-power error. It's possible that the issue lies with the BIOS or another aspect of the program. Unfortunately, without more information, it's difficult to provide a specific solution. However, you can try reaching out to the program's support team or consulting their documentation for troubleshooting steps. They should be able to assist you in resolving the problem with the programming.
I need to copy the current configuration to a new pc. I really don't want to reconfigure everything cause the sign is in a bad place and hard to connect too. The current config is with Windows 10 home and the new is 11 home
To move the configuration of LedCenterM to a new laptop, you can follow these steps:
This process should help you avoid the need to reconfigure everything from scratch.
To determine the c-power model of your display board, you can refer to the documentation or user manual provided by the LedCenterM program for Windows. It should contain information about identifying the specific model of the display board.
Is there anyway to lock certain programs down ie. I have 4 programs setup to display certain windows and I want to lock 3 of the programs down so they cannot be changed by others
Yes, it is possible to lock certain programs down using the "LedCenterM" program for Windows. Consult the program's documentation or support resources for instructions on how to achieve this.
I would like to change the IP address on my led text display, using LedCenter. I need the password when I go into TOOLS, LED TOOL, then select C-POWER 3200. To make changes and send the file to the led display, I also need the password.
C-power products use 16888 as default administration password. Input this password then you will have access.
I'm getting a 10060 error from LedCenterM 5.0. What can I do?
In order to fix the issue, I suggest you update the software to LedCenterM 5.1.2. It is the latest version of the program and it fixes many bugs and crashes. If the problem persists, uninstall the program and then install it again. Also, after the removing process is complete, run a registry cleaner like CCleaner or Glary Utilities.
hi, I have a problem with this device, ledcenterm recognizes the device, but when I want to program it gives me error "C-power (1): can't send the file! screen controlerflash is not enough for program data !. when I try again to do the programming gives me another error; "C-power (1): failed to communicate with controler". then I have to unplug the power plug and then reconnect it. the program knows the device but not correctly this is the error "read back c-power 1200,1.0.0 (w) .0 (h) with a written under red "invalid data will be reset, please change manually !. I change manually and put the dimensions of the panel" width 256 height 16 " but despite this it does not work. This problem was sporadic before, but it worked, now it has stopped completely and I can no longer do a programming. can you help me to solve this problem? could it be a BIOS problem? with c-power tool what can i do to make it work ?? do you have any files for to update the BIOS or the BOOT? what is the password to make these updates? please wait for a reply from you.
best regards
It seems like you are experiencing a technical issue with the LedCenterM program and the C-power error. It's possible that the issue lies with the BIOS or another aspect of the program. Unfortunately, without more information, it's difficult to provide a specific solution. However, you can try reaching out to the program's support team or consulting their documentation for troubleshooting steps. They should be able to assist you in resolving the problem with the programming.